Super Drift SD3.0 Black Version [SOR-030]

Product description ※Please note that product information is not in full comprehensive meaning because of the machine translation.

Product Description ■ In the increasingly sharp drift machine, the operational characteristics of the steering system are the most important point in finishing the machine.
The new SD3.0 steering system is equipped with a sense of stability that gives the driver more leeway while keeping track of the road surface.
Although it is an orthodox system of steering wiper and center link, the steering base changes the pivot height when the wiper arm swings, reducing the bump change in the toe angle caused by the suspension stroke.
The change in behavior caused by the throttle operation in the entire corner is suppressed, and the sense of stability is dramatically improved.
In addition, the aluminum bulkhead support on the front is installed on the rear side of the main chassis, so the rigidity around the front is greatly improved, and smooth cornering with less catching is achieved.
The bulkheads around the rear are similar to the conventional ones, but the battery is installed at the rear end to increase the rear load.
The upper deck post is also installed, and the mount on the servo rear side can be used as a post, so the rigidity balance can be set to your preference.
The alumite color is also available in 4 colors of black, blue, purple and red at the same time.

• Graphite double-deck chassis
• New aluminum steering system
• Aluminum front bulkhead support
• Aluminum servo mount
• Aluminum upper deck post
• Aluminum rear bulkhead
• 3/4 gear selection type aluminum shock tower
• Aluminum suspension arm mount
• Aluminum integrated front axle
• Rear ESC mount