OCA-3100HV (100A) [52022000]

Product description ※Please note that product information is not in full comprehensive meaning because of the machine translation.

Product Explanation ■ Brushless Motor ESC (Amplifier)
For airplanes
Features of OCA-3 Series
・ OPTO-ESC for airplanes with Lipo12 cells (separate power supply specifications).
・ Uses an aluminum heat sink integrated case for high heat radiation.
・ Equipped with a program that can set the time to reach the maximum brake amount during normal braking.
Equipped with a regenerative brake function with active freewheel mode.
Equipped with a governor function that can control the rotation speed over a wide range of throttle. (Excluding F3A games)
・ Detailed settings of various parameters can be made by an optional OCP-3 programmer.
[Specifications]
Input signal period : 50 to 400 Hz
Input voltage range : 14.8V-52.2 V (4S LiPo-12S LiHV)
Peak current : 150A (5 seconds 20 ° C cooling wind 5m/s)
Maximum current : 100A (180 seconds 20 ° C cooling wind 5m/s)
Equipped with BEC (insulation of input signal with photo coupler)
Advanced setting : fixed 0 to 25 ° 1 ° 1 ° selection
PWM frequency : 8 kHz 16 kHz 32 kHz selection
Brake amount setting : 0 to 100% in 2% increments
Brake time : 0 to 2.0 seconds in 0.1 second increments
Current limit : OFF/40 to 120% in 5% increments
Governor : ON/OFF (Excluding F3A games)
Throttle setting : automatic / numeric setting stop position / maximum position
External dimensions : 37 mm (W) x95mm (L) x16mm (H)
Weight : 125g (including lead wires)
Power lead wires : 13 AWG length 100 mm silicon coated
Motor lead wires : 14 AWG length 100 mm silicon coated
Lead wires for setting : 22AWG3-Wire (black - red - white) 240 ± 10 mm
Lead wires for setting : 22AWG3-Wire (brown - red - orange) 140 ± 10 mm
Parameters can be set by OCP-3
Protective functions : start protection / low voltage cutoff / no signal cutoff / overheat protection / anti-spark / automatic recognition of the number of battery cells