PiCar-V Smart Video Car Kit V2.0 for Raspberry Pi

Product description ※Please note that product information is not in full comprehensive meaning because of the machine translation.

"Raspberry V Smart Video Car Kit V2.0 for PiCar Pi" is now available from "SUNFOUNDER".
[Product Details]
[Product Details]

Upper Plate, Front Half Plate, Back Half Plate, Pan and Tilt Plate, Pan and Tilt Base Plate,
Camera Mount Plate, Stealing Connector Plate x 2, Gasket Plate x 6, Stealing Linkage Plate,
Hex Front Wheel Fixing Plate x 6, Servo x 3, Rocker Arm, Forked Rocker Arm, Forked Rocker Arm,
Rocker Arm Fixing Screw x 2, Rocker Arm Screw x 2, M1.6x4 tapping screw x 8, M2x8 screws x 6, M2.5x6 screws x 8, M2.5x12 screws x 8,
M3x8 screws x 8, M3x8 countersunk screws x 2, M3x10 screws x 7, M3x25 screws x 4, M4x25 screws x 2, M2 nuts x 6, M3 nuts x 21,
M4 Detent Nut x 2, M2.5x8 Copper Standoff x 8, M3x25 Copper Standoff x 8, 4x11x4F694ZZ Flange Bearing x 2,
100 mm HX2.54 5-pin jumper wire, 50 mm HX-2.54 4-pin jumper wire, 50 mm HX-2.54 2-pin jumper wire, 100 mm HX-2.54 2-pin jumper wire,
ロボットハッツ, PCA9685 PWM Driver, Motor Driver Module, 2x18650 Battery Holder, DC Gear Motor x 2,
120 ° Wide-angle USB Camera, Rear Wheels x 2, Front Wheels x 2, Ribbon (30 cm), Phillips screwdriver, cross wrench,
M2.5/M4 Small Wrench, M2/M3 Small Wrench, User's Manual
* There is no Japanese description in the manual. Please be aware that there is no guarantee on batteries or remaining battery.
Please be aware that there is no guarantee on used products. 18650 2.5