Tool decal Decurling Quick Tray [PMKJ008]

Product description ※Please note that product information is not in full comprehensive meaning because of the machine translation.

Product Description ■ Decurling Quick Tray is a specialized decal tray for processing large numbers of decals at once.
In addition to general decals, this product is also suitable for various decals and situations, such as the small-sized caution decals that are often used for Character duct models and scale models that are popular recently.
★ Solving Problems with Decals!
Have you taken a long time to apply a water-based decal by soaking it in water one at a time?
Have you ever tried to apply multiple small decals at the same time, but the decal got soaked in water too much and lost its adhesiveness?
Decurling Quick Tray is a revolutionary product that solves both problems. If you soak multiple decals in water and then pull up the sponge plate,
the decals can be applied to the sponge plate one after another, greatly reducing the time required and making it much easier to apply decals.
Because the decal is placed on a special sponge, the moisture in the sponge prevents it from drying out for a long time while minimizing the loss of adhesive strength and reducing failure.
If you have 10 of decals, you can work on them at the same time and keep the adhesive strength for 20 to 30 minutes.
★ Use specially designed tray to handle decals freely!
The Decurling Quick Tray combines the water tray part and the sponge plate with the arm, so you can pull up all decals at once just by sliding the plate, and then start pasting. In addition, it has a stable design so you don't have to worry about spilling water around.
★ There are a lot of useful gimmicks!
The tray has a space to throw away the mount left after pasting. You can dispose can be disposed of together, it is not scattered and easy to clean up.
The plastic tweezers that come with the product are designed specifically for pasting decals. The tips of the tweezers are made wider so that the decals can be easily grasped.
The material is made of resin so that there is no possibility of damaging or tearing the decals. In addition, curved scissors, which are useful for cutting out water transfer decals, are also included.
With its curved edge and compact tip, it makes it easy to cut small decals when cutting dense decals.
★ This 1 set is the complete set for pasting decals!
To paste a water-transfer decal, all the necessary tools are put together in this 1 set, from cutting the first decal to throwing away the trash.
So you don't need to have extra tools, you can just fill it up and use it right away.
[Product Details]

Movable Decal Tray with Sponge
Resin Tweezers
Curved Scissors
* The maximum decal size that can be used in the decal tray is about 60 x 70 mm.
* After using the sponge, wring it out while rinsing it, and store it after drying it.
* If the sponge dries, it may shrink compared to the original size, but it will be restored if it is soaked in water, so it is not a defective product.
* Depending on the decal, the soaking time may differ, but as a guide, please remove it from the water a little earlier.
* If you are concerned about the adhesion, please use this product together with softener.