Super Traction Rear Lower Suspension Arm 51 mm 2 Pieces [TP-598]

Product description ※Please note that product information is not in full comprehensive meaning because of the machine translation.

Product explanation ■ It is a high-performance suspension arm with Delrin shaping.
It can be used for RDX and YD-2 series (RD1.0, RD2.0, SD1.0, SD2.0) with inner suspension pin of Φ 3 mm and outer suspension pin of Φ 2 mm.
Bearing support of inner suspension pin is possible. With the same shape on both sides, it can be used reversibly.
* Bearing (630) with outer diameter 6 mm x inner diameter 3 mm x thickness 2.5 mm can be used.
* Please be aware that the shaft may not pass through the bearing depending on the combination of bearing and suspension pin.
* If it does not pass through, shave the suspension pin thinly with sandpaper.


Super Traction Rear Lower Suspension Arm x 2
M2 Tapping Screw x 4 (for fixing outer suspension pin)
M3 (inner diameter 3 mm) x thickness 2.5m color x 4
* Depending on the type of installation, there may be a gap between the suspension mount and the suspension arm. Adjust it with a commercially available M3 spacer if necessary.