YURUGIX Tire Break-In Roller [YTR-004]

Product description ※Please note that product information is not in full comprehensive meaning because of the machine translation.

Product Description ■ YURUGIX Tire Break-in Roller is a tool for breaking in rubber tires of 1/10 electric touring car.
It consists of a 3-piece structure consisting of a shaft, disk and bushing. The disk part that is inserted into the wheel is a reversible structure, so please assemble the tool according to the wheel you are using.
There are 2 types of wheels that can be used.
□ Dish Wheel Made by YURUGIX
□ Dish Wheel Made by RUSH
〜 How to use 〜
1. Insert the shaft from the side opposite to the outer diameter of the disk that matches the wheel you are using.
2. Screw the screw part of the shaft into the screw part of the bushing.
3. Insert it into the back of the wheel you are using.
4. Insert a hex wrench of about φ 3.0 mm into the hole in the center of the shaft.
5. Hold the grip part and bit part of the hex wrench and press the tire against a flat surface to roll it.
〜 Tips 〜
When rolling a tire, by rolling the tread surface of the tire, the inner fits inside the tire, suppressing the unstable behavior of new tires when running.
In addition, by rolling around the side wall of the tire, the adhesive that leaks into the tire is crushed and the original performance of the tire is exhibited.