Radio control Super Traction Rear Lower Suspension Arm 48 mm 2 Pieces [TP-556]

Product description ※Please note that product information is not in full comprehensive meaning because of the machine translation.

Product Explanation ■ It is a high-performance suspension arm with Delrin carving.
It can be used for RDX and YD-2 series (RD1.0, RD2.0, SD1.0, SD2.0).
Inner suspension pin can be used for models with Φ 3 mm inner suspension pin and Φ 2 mm outer suspension pin.
Bearing support for inner suspension pin is available.
* Bearing (630) with outer diameter 6 mm x inner diameter 3 mm x thickness 2.5 mm can be used.
Depending on the combination of bearing and suspension pin, the shaft may not pass through the bearing
. If it does not pass through, please shave the suspension pin thinly with sandpaper.
Both sides can be used reversibly with the same shape.
<>
Super Traction Rear Lower Suspension Arm x 2
M2 Tapping Screw x 4 (for fixing outer suspension pin)
M3 (inner diameter 3 mm) x thickness 2.5m color x 4
* Depending on the type of installation, there may be a gap between the suspension mount and the suspension arm. Adjust with a commercially available M3 spacer if necessary.