1/200 Battleship Yamato Bridge (with genuine etching parts / pedestal Motegi deck seal) "Collecting Equipment Series No. 2 EX-4" [020495]

Product description ※Please note that product information is not in full comprehensive meaning because of the machine translation.

The bridge part of "Battleship Yamato-type" comes with etching parts and pedestal Motegi deck seal!
[Structure and Specification Features]
It is composed of color-coded parts, and the image coloring is reproduced without painting.
Since it is a snap-fit type assembly, it can be assembled without using adhesive.
[Product Features]
It is a large model of about 18 cm when completed with 1/200 scale.
The gray color called battleship color uses a gray color plastic that imitates the color of Kure Navy Arsenal.
The product is based on the 1945 final configuration of the Yamato class battleship "1st Yamato". The upper part of the bridge is equipped with No. 21 and No. 22 detectors.
The upper guard post has been enlarged and there is a soldier waiting post at the rear. ・ The signal flag deck has been expanded, and machine gun shooting equipment has been added.
[Distance meter and air defense command station washcloth]
A messenger station whose shape was revealed in the Musashi seabed survey was installed in Yamato at that time, which is presumed to have been equipped with the same equipment.
The light window on the slightly upper surface of the messenger station and the entrance and exit hatch on the side are reproduced.
The external shape composed of the unique curved surface is reproduced from the remaining drawing.
The leading edge of the air defense command post is a reproduction of the covering revealed by the Musashi submarine survey. Recorded as a bonus part that requires adhesion.
In the center of the cover, there is a window (recess) that would have been a compass, reflecting the lack of a binocular telescope.
The lens part of the 15-meter distance meter is reproduced with white molded parts. BR : The 2-kilometre signal pillar has been shifted to the starboard side. (・ The azimuth measuring antenna support originally rises from the vertical plane of the distance measuring room, but it is omitted from the horizontal plane due to the restriction of the metal mold.)
The wall surface of the tower supporting the distance meter reproduces the appearance of more ribs lined up, strengthened by the lesson of the Musashi distance meter falling off, and the hatch of the starboard side is reproduced.
The hatch on the floor behind the Air Defense Command Post is accurately expressed in convex mold from the remaining drawing.
"First Bridge washcloth"
The First Bridge has reproduced the exterior and the inner structure which is hidden when assembled.
The bridge window is made of transparent parts to create a realistic glass appearance.
The interior of the bridge was designed after research based on the remaining drawings.
The difference in height of the raised floor and the ceiling surface with exposed steel body are also expressed.
There is a compass in the center, and the floor has a carved clay pattern.
Both floor-mounted and ceiling-suspended versions of the Spy-glass telescope will be used. The 18-centimeter Spy-glass, which would have been relocated, will be installed in the upper lookout.
The external shape of the First Bridge washcloth has been reproduced as much as possible due to the restrictions of the mold.
The side of the first bridge reproduces the revised upper lookout shape and five side windows, and the partition door is reproduced inside.
The window shape of the rear part of the First Bridge is expressed by the chamfering of the corner (only the upper part) and expresses the difference of the chamfering condition between the most central part and the outer part.
The angle of the signal yard is set based on the left drawing. The difference between the anhedral angles of both sides and the center is reproduced.
The lens surface of the 60 cm signal light installed in the signal yard (left and right) is a clear part.
On the floor around the 60 cm signal light installation, 4 missing parts were reproduced by sculpture.
The No. 22 probe has been made into a component with the shape of the one side installed on both sides of the Nagato bridge and an extended cover on one side.
"First to Second Bridge washcloth"
The structure at the both ends washcloth of the 1.5 meter distance meter is three dimensional more appropriately than the remaining drawings.
The Bluework, which is equipped with a 13-millimeter tandem gun, has been stripped of its lip and reduced in height to secure a shooting range.
The forward facing side window (Chief of Navigation / Chief of Staff Resting Room) in the rear upper part of the 13 mm tandem rifle is also reproduced.
The R-plane, which consists of planar connections of the second gun command post, is expressed as per the drawing as much as possible.
On the front of the second bridge, there is an engraving of a ladder which avoids the center and is slightly shifted to the port side.
There is an actual gap of at least 10 cm between the signal station deck and the 3/4 searchlight control tower, and the gap is reproduced in the modeling.
The base, in which the 1/2 searchlight control unit was replaced with a machine gun shooting device, reproduces the expansion by adding the expanded area.
The shape that is squeezed from the lower part of the second bridge toward the control tower and the R shape of the corner are accurately three dimensional.
The rear face is designed to express the surface shape composed so that the upper plane and the lower curved surface gradually shift between the operation room (under the first bridge) and the signal station deck and the upper part.
The Bluework of the lower lookout was shaped like the appearance from the time of completion with the lip which was probably installed for the purpose of wind shelter only in the front direction.
[Control tower - Bridge base washcloth]
On the back of the signal station deck, it is faithfully three dimensional based on the signal station flat plan view that still exists today.
The stairs connected to the additional signal station deck accurately reproduced the figure shifted to port side.
The second incendiary, which was installed later, is reproduced with all receivers in front of Bluework and outposts with raised footstool.
The control tower peep window has a step-like cross section due to the relationship between the thickness of the armor and visibility, so it is expressed including the difference in width of each part.
The control tower canopy includes a periscope hatch part as an adhesive bonus part.
At the command post, the cover was left open and the windows were made of transparent parts.
When the width of the front part of the turret is 4600 to be millimeters and that of the rear part is assumed to be 5000 millimeters, the assembly part of the difference is expressed by the estimated shape behind the Type 94 antiaircraft system.
The window shape from the front to the top of the Type 94 High Launch Vehicle has been reproduced by remodeling the opening.
The base on which the Type 94 antiaircraft system is installed and the structure which looks like an air intake which can be seen only in Yamato is added and reproduced at the hem.
Among the three barreled guns with two on one side, the shape with a projection at the lower end of the gun barrel is expressed from the recorded photograph.
Only one frame of the can room air intake port at the front of the base is a hinged mesh for inspection, reflecting the difference shape.
[Machine gun Fire Control System washcloth expanded]
The support shape of the machine gun shooting device was based on the diving survey by Musashi, and the circumference was shaped with some estimation.
In the submersible investigation, a plate-like object on the rear surface of the device was assumed to be an access platform and shaped.
A reproduction of a ladder redecorated to cover the air inlet of the can room, which is clear in the recorded photograph.
The line of movement connecting them and the passage next to the waiting station for soldiers to pass back and forth were reproduced.
The package Type 94 46 cm gun, the package is finished like a blue blueprint of a naval vessel and has a style with a mechanical atmosphere.
[Parts color]
Bridge Main Part : Kure Arsenal Gray
Distance meter / High-Radiation Device Lens : White
Window glass / Searchlight Lens : Clear
grating Floor : Beige
Machine gun : Gunmetal
[Attached Etching Parts]
Genuine Etching Parts for Upgrade
Contains parts corresponding to the final form in 1945.
The etching parts are a set of 2 sheets, each of which is about 18x10cm in large size and contains about 185 kinds of parts.
The plate thickness is 0.15 mm and has both moderate strength and flexibility.
The top of the bridge can be replaced with a set of No. 21 probes.
Contains azimuth detection antenna, distance meter front scaffold, rear reinforcement girder, distance meter lens cover (open state), etc.
For the upper part of the bridge, there are many parts that increase precision by adding and replacing characteristic parts such as yard and rear ラッタル.
The reverse antenna is folded to reproduce a thick shape.
The rear radiotelephone antenna yard creates a steel atmosphere with a light hole.
There are several parts to colorize the wall surface of the lower part of the bridge.
The air supply port to the engine part has a mesh and lattice structure separately expressed, giving it a very three dimensional shape.
[Exhibition pedestal and wooden deck seal]
Exhibition pedestal is attached.
The size is about 9.5x15cm and the molded color is black.
Wooden deck seal of the size that matches the exhibition pedestal is enclosed.
By spreading (pasting) between the exhibition pedestal and the bridge, you can create an atmosphere like 実艦.
[Attached Contents]
Runner x20, Wooden Material Seal x2, Etching Parts x2, Assembly Instruction Manual x4
Number of Parts 190
Completed size : Width of both sides approx. 92 mm, length of front and back approx. 87 mm, height approx. 176 mm
Adhesive type bonus parts 13
[Product Details]
Scale : 1/200