Diorama Accessories : Acrylic Brick Milan Paving Stone Type [GSWD-12566]

Product description ※Please note that product information is not in full comprehensive meaning because of the machine translation.

Product Description ■ It is an acrylic mold that you can make real bricks and paving stones corresponding to 1/35, 1/32 and 1/48.
You can reproduce various surface textures and patterns that reproduce real bricks and make high-quality diorama accessories.
The material to be filled in the mold is a synthetic resin paper clay that hardens by air drying such as modeling clay DAS.
>
Usage :
1. Cleanly remove any dirt or dust from the mold.
2. Attach cooking paper, wet kitchen paper, masking tape, [GSWD-10354] Paint Equipment S (A6) size Mylar stencil sheet to one side of the mold.
3. Place the mold on a flat surface with the side to which the sheet is attached.
5. Flatten the surface. Press down on the rounded clay with your fingers to fill the mold. Remove excess clay on the surface with the attached plastic spatula.
6. Dry the clay until it hardens.
7. Once the clay has completely hardened, peel the sheet off the mold slowly and carefully.
8. Take out the brick. Lightly poke the brick with the round tip of the brush handle and push it out of the mold.
9. Smooth out the sharp edges of the brick. Place the brick on the palm of your hand and lightly shake it with your hands.
Scale : 1/35 (1/48-1/32)
Brick Size : Approx. 6.3 x 6.6 mm
Brick Thickness : Up to 3 mm
Mold Size : Approx. 6 x 11 cm
Plastic Spatula contains 2 sheets.
The material to be filled in the mold is most suitable.
Usage :
1. Cleanly removes any dirt or dust from the mold.
2. Attach the sheet to one side of the mold.
Place it on a flat surface.
Press down on the rounded clay with your fingers to fill and lightly shake it.
Scale : 1/35 (1/48-1/32)
Use instant adhesive or an acrylic sealer such as [GSWD-4149] medium / decoupage mat (matte) for adhesion.
Scale : 1/35 (1/48-1/32) <