1/72 ツァラトウストラ Apter-Blinger "The Five Star Stories" HIGH-SPEC GARAGE KIT Resin-Cast Kit Volks Hobby Paradise Web Only

Product description ※Please note that product information is not in full comprehensive meaning because of the machine translation.

Product explanation ■ This product is an achromatic resin cast kit before assembly.
From "The Five Star Stories", HIGH-SPEC GARAGE KIT has a lineup of 1/72 ツァラトウストラ Apter-Blinger.
This item is limited to Volks Hobby Paradise Web.
Everything is out of spec
The crystal of total war on the project team of F.S. S. Zokei Village
The most powerful super robot in the history of the star cluster, "ツァラトウストラ Apter-Bllinger" is now visible!
Strangely complex shape of head armor
Watch out for the meandering and strangely complex shape of head armor to screw in the headback halo and tune horn.
It's likely to tilt backward because of the weight of the back of the head, but by design, the Head Back Halo is not so heavy because it's made of hollow Helios armor called a "radiation veil" and it's just balanced with the weight of the Tune Horn.
With this kit, there is no omission of distortion and weight countermeasure of the part with sufficient thickness.
Other than that, it is full of things to see such as the sharp eye light with delicate shaping. The jet-black flower cross (mirage mark) on the side of the head comes with a decal.
Tunehorn
The distinctive two horns, called tunehorns because they look like "tuning forks", are powered by each of the two backbones and can launch a "satellite polyphonic beam" powerful enough to completely burn an urban area.

Because the plasma vortex winds up between the two corners, it blows back at launch to prevent the horn from melting.
The normal state is defined as a state of about 30 degrees above the maximum depression angle of the face and horizontal state.
Also pay attention to the earrings that can be seen from the side panel of the head. Both tune horns have beautiful clear resin molded parts.
Fatima Cockpit
The Fatima Hatch, which is hidden by the Tune Horn and the side panels on the head, can only be moved in and out when they are offset by the Twin Swing.
During an emergency exit, the horn and side panels are blown off (usually through the hatch located behind the rainbow slit in the neck).
Heat Shield
The head-back halo, which is set at the top of the head, is made of hollow Helios armor and is called a heat shield and is not very heavy in the setting.
The second and third stages are called Bender Wigs which is an auxiliary device for the headback halo that distributes heat from the two backbones to dissipate heat.
In this kit, metal wire is insert-molded in the abdomen bellows part which supports the upper body of this large volume, and the strength countermeasure is firmly done.
Rainbow Slit / Air Barrier Generator
The rectangular panel is a device that creates a field that curves energy toward itself and collects it in a reflector, and can also be equipped with an air barrier that blocks heat generated by itself.
The neck armor itself under the rainbow slit becomes the main fatima hatch.
Because this kit is clear molded, you can enjoy the coloring of the rainbow slit with your favorite paint expression. The best part of a three dimensional object is that you can see the cervical vertebrae of 2 twin swings in the back of the neck.
Front Shoulder Flyer / Active Weapon Reactor
Beam guns, etc. twisted by the energy bending field generated by the rainbow slit in the neck, are sucked into this reflector.
Along with the Rainbow Slit, it was used by Aisha's Foksly ヒバイテ.
The original author says that the device was used by the Fok-Sully ヒバイテ after 30 years of unweathering, so it's also interesting to think about the scene that the "Zaratra" might use while assembling the kit.
It's also interesting to think about Hase.
Arm
Note the twin swing mechanism unique to GTM. The connection method of the arm flyer and the structure of the forearm can be understood well from the bending elbow twin swing joint.
In making this part three dimensional, according to the original author, it was almost a common part, and the setting illustrations of "Haihua Bllinger" (published in the December 2021 issue of Monthly Newtype) and "Grit Bllinger" (published in the January 2022 issue of Monthly Newtype) as well as "Teiki Magna Palace" were very helpful.
I want you to feel the history of the Mirage machine by taking it in your hand.
Arm Flyer
Arm flyer that is slightly smaller defensive armor to the body volume. The cross section is thick and cut almost vertically, which is the characteristic of the armor expression of GTM.
This kit takes advantage of the characteristics unique to the resin kit and perfectly reproduces the thickness as well as sharp edge by clear molding.
Enjoy the fully transparent Helios Hyperkilled armor with your favorite paint expression.
The pitch-black flower cross (mirage mark) on the surface of the flyer comes with a decal.
Palm / gut brow / sheath (waist skirt armor and weapon slot)
The enormous palm unique to GTM, which is said to be able to move all fingers with twin swing, not only has its delicate shape, but also has a metallic paint expression that is different from the frame structure.
Gut Brow's Tatewaki method is common to Mirage machines and is usually housed in a weapon slot, a modified version of skirt armor, similar to the Grit Bllinger, published in the January 2022 issue of the Monthly Newtype.
The blade is finished in the same plating style as the bellows, and the handle part is finely divided into 3 colors : the slightly transparent exterior color, the metallic frame color, and the same plating style as the blade.
Rear-Shoulder Flyer / Energy Catalytic / Multi-Way Arm Bypass The Rear-Shoulder Flyer includes a system called the Energy Catalytic, which converts the main energy from the chest into plasma energy, as well as a bypass that sends it to the main "Frame Launcher" (same layout as the "J-Destroyers").
The two connected hose-shaped multi-way arm bypasses have a built-in twin swing system.
They not only move freely but also serve as a support rack for the frame launcher, so even if the main rider releases the launcher, the launcher itself floats.
Therefore, in normal times, it is floating as if to stand up, but since both arms are free during use, it is possible to fight in GATT Brow and so on (although it seems that the main riders hardly use GATT Brow).
In this kit, the complex structure is beautifully reproduced with the exquisite spatial composition. You can see where the enormous amount of energy is generated and how it is transmitted. You can also see it in three dimensions as you assemble it.
Flame Launcher Inferno Napalm
It is the main weapon of the main cavalry, and the red line of the barrel is the most characteristic. "Flamethrowers" not for anti-GTM fighting but for extermination and killing.
It is said that the target object does not even leave ash because the surplus energy of the main rider is converted into plasma and flames exceeding 8000 degrees are emitted simultaneously like a beam gun.
At that time, the radiation port part of the tip is extended by the swing slide so that the rider does not melt by the plasma and heat, and the reaction of the launch is absorbed by the "ankle crane" of the leg.
In this kit, metal wire is insert-molded in the launcher rail part at the tip, and metal wire is inserted in the plasma rail canon of the gun barrel part when the internal structure is assembled.
Measures to prevent distortion and strength are taken. The characteristic markings here and there are decals attached.
Plasma Chamber / Back Drafter
The "Plasma Chamber", a cylindrical control device that compresses energy, and the "Back Drafter", an outlet for excess plasma, are beautifully reproduced.
You can see how the energy transfer bypasses are connected.
Frame Launcher Suspension Method
In the configuration, the launcher body is suspended by two multi-way arm bypasses connected from the rear shoulder flyer.
In this kit, as a measure against aging degradation, grip it with the wrist and connect it to the weapon slot (sheath of Gat-Brow) to hold it firmly.
You can keep a long frame launcher beautifully.
Abdominal Bellows Structure
With the same "Titin Frame" as the Golden GTM "Emperor's Magna Palace" made by Amaterasu, the body of the Emperor has a more robust double structure with a fully transparent Helios Hyperkilted armor on top of a Hakugin laminate and superchrome triple Helios quartz armor that protects the keel.
In this kit, the characteristic abdominal bellows structure is perfectly reproduced by precise shaping and clear molding.
The main body of the bellows, which can be seen in the depth of thick transparent armor, is beautifully finished with plating paint.
In addition, the metal wire is insert molded to support the upper body with a large volume, as well as the ease of assembly such as the easy angle determination.
Keel (back bone)
The inner frame that protrudes to the keel and back of the waist and the transparent armor that covers it. It is a valuable cut that you can see the density of the back which is usually hidden by heat radiation veil such as Bender Wig.
The keel is the most important part of the GTM most important part of the GTM to support it and deliver energy to each part.
The term "frame" usually refers only to this part, such as the Titin Frame.
Front Waist Skirt Armor / Mirage Number
Judging from the plating tone coloring, the front waist skirt armor is also a double structure of Shirogane laminate super chrome 3 double Helios quartz armor and fully transparent Helios hyperkilted armor as well as the abdominal boot.
Like the body that protects the keel, has it been hardened to protect critical parts from the enormous energy generated by the Frame Launcher?
The fact that you can feel Hase of the setting function and the scene in the play while assembling is also the true value of the three dimensional object of the design village 『 F.S S. 』 which is thoroughly reproduced to the details.
Mirage number comes with a decal. According to "Designs 6", it can be numbered according to your favorite knight.
Knee twin-swing joints / legs armor
Unlike the "Leopard lion frame" of the usual Mirage Knights GTM such as "Grit Bllinger" and "Haihua Bllinger",
Check out the strong twin-swing joints unique to the special "Titin frame".
If you focus on the twin swing joint of the knee, the characteristic of the Mirage GTM is the solemn design as if the structural material is sandwiched between the two stage arc swing joint which is usually closely attached in the general GTM, but you can clearly see that the main rider has been made larger.
Also note the overlapping leg armor edges. The fact that thick armor expression can be reproduced is also unique to resin cast kit.
Twin Engine 1014 Type Engine on Legs
Twin-engine legs with ハーモイドエンジン "1014" on the left and right.
The bright color of the rainbow slit shines on the simple exterior expression of only white and black.
The engine itself is small enough to fit in the legs, but the heat generated by its massive power is astronomical, so it by an "" Ankle Crane "" attached to the rear heel. "
The front of the legs and the instep are double armour covered with fully transparent Helios Hyperkilted armour as well as around the torso and hips.
Especially, the internal structure of the legs is considered to be protected with considerable strength and solidity, probably because of the built-in ハーモイドエンジン or because of the plated armor expression.
Static long tail / Ankle Crane
The static long tail, equipped with an expansion of the rear waist skirt panel, moves automatically while maintaining the parallel position so that it does not interfere with other parts such as the Ankle Crane in order to dissipate the heat of the energy sent from the engine of the leg and amplified by the function generator in the breast first.
This kit reproduces the stretched condition during battle. It is firmly held in the waist block for angle determination and strength countermeasure.
The Uncle Crane consists of four pairs of Climbing irons parts on each side and moves unobstructed in conjunction with the motion of the GTM.
The gear is designed to dissipate heat from the engine, but it can be worn in two pairs depending on the situation, or can be removed in a "war against GTM TM".
When fully removed, the engine power is comparable to that of a normal GTM, as seen in the 2989 Battle of the Chorus and the 3960 Battle of the Black Knight.
In this kit, 4 pairs of Climbing irons are beautifully reproduced with plenty of weight.
In addition, the heat radiation slit is open everywhere to produce a three dimensional look, and a thin film is placed on the bottom so that the joint treatment does not become difficult while avoiding mold deviation during mass production.
Please note that the utmost consideration has been given.
[Product Details]
Completed Size : Total Height approx. 361 mm, Total Width approx. 255 mm, Total Length approx. 831 mm
Number of Parts : 193 items
Original model production : Man Oishi (Zokei Mura F.S. S. Project Team)