HO Narrow 1/87 Electric Tensha-dai II Assembly Kit (General Type) [HNS-110AK]

Product description ※Please note that product information is not in full comprehensive meaning because of the machine translation.

Product Description ■ A Tensha-dai assembly kit with 60 mm diameters and 30 ° divisions.
[Features]
● As the rotation of the Tensha-dai is an intermittent drive system, it is easy to adjust the position of the rail.
● As the rotary switch is linked to the center of the rotating shaft, the power supply of the fixed side rail is automatically switched by the rotation of the Tensha-dai.
● Exterior part is laser cut colored acrylic plate, so painting is not necessary.
● As it comes with a dedicated drive unit and built-in embedded operation panel (with battery holder), separately purchased parts are only rails and batteries.
● It can be used for small N-gauge vehicles.
● There are 2 types depending on the shape of the rotating part.
[Notes]
● Layout board needs to be at least 48 mm deep (inner dimensions).
[Specifications]
● Tensha-dai diameters : φ 60 mm
● Rotation angle of vehicle : 30 ° 12 divisions
● Wiring requires soldering work.
[Specifications]
● diameters : φ 60 mm
● Rotation angle of vehicle : 30 ° 12 divisions
● Dimensions : φ 100 x H49mm
● Completed Weight : approx. 70g
● Mounting holes : φ 88 mm
● Operation panel (assembly) :
・ with rotation direction selector switch
・ with battery holder
・ Battery used 1 AA dry battery
・ Panel dimensions L100mm × H28mm × D25mm
・ Mounting holes L80mm × 18 mm
● Materials ; colored acrylic resin plate (partly paper)
● Accessories :
・ Set of screws
・ Set of cords